make a back yard pergola: for the past 10 years, all activity in our back yard centered around a large wooden play structure. this ungainly structure served our kids well, whether as a pirate ship, part of an obstacle course, or as a manhunt hideout. however, as they gre
the secondary pergola rafters and girders. see patterns on page 7 and 8 begin assembly by installing four c 2x10 girders on the main pergola and then two h 2x6 girders on the secondary pergola. install two m and n 2x6s and one o 2x6 girders around seating area. f g f f g f make second level posts by sandwiching one g 2x4 between two f 2x6s.
diy pergola plans assembly. measure a 10x10 area making sure it is squared by measuring diagonally in both directions. use 12 long 6×6 poles a with 2 in the ground with concrete as shown in illustration above. if you are using anchors on the poles use 10 6×6 poles. use a level to make sure all the poles are leveled.
what size headers should i use? the pergola im making is 16 x 12 with the headers being the 16 feet and rafters 12 feet. no bearing weight. i was thinking 2 x 10 header and 2 x 6 for the rafters. also can i get by with one header on one side it will be by the house but not attached.
next, you have to build the shade elements for the pergola out of 2×8 lumber. therefore, mark the cut elements to the slats and get the job done with a jigsaw. smooth the cut edges with sandpaper and remove the residues properly. it is essential to make 1 1/2 x 3 notches to the component, otherwise it wont fit properly to the support
fabric shades and sails are similar and can easily be installed to any structure. sails are going to be more durable because they are made of materials that are resistant to sun exposure, moisture, and the elements. outdoor pergola roof materials can easily be purchased online via the many manufacturers and distributors of such products.
2 x 6 x 14 number will depend on size of pergola 2 x 2 x 14 number will depend on size of pergola w dont forget to measure to make sure your 2 x 12 is centered. once the 2 x 12 is in place drill through the beam and post with a paddle bit and attach the beams to the post with a lag bolt, washer and nut.
besides the redwood, i think the real wow factor of this pergola is the arch details in the 2×12 beams but i cant do anything without a pattern. the pattern can be printed on 8 1/2 x 11 paper, but will have to be taped together. there are little gray alignment lines to help. download 14 beam pattern download 12 beam pattern
Shanghai Seven Trust Industry Co., Ltd, founded in the year 2008, is a hi-tech enterprise which specializes in the R&D, sales, and service of WPC materials, Provide excellent products, professional technology and sincere service.